Natural Pool Alternative

IMAG0625 IMAG0635

This is my temporary solution to a pool in my backyard. It is an above ground pool sunk into the ground about half way. I know some of you are going to tell me the walls will collapse from the weight of the sand but its not possible due to the weight of the water. I have had it like this two years so far. I bought a sand filter and a salt water system. I even got pool lights. Its about 4 feet deep and 18 foot diameter. It has kept my children super happy. They swim two to three times a day and it cost only the fraction of an inground pool. This year I plan on hiding the grey sides with bamboo fencing. Lowe’s sells 6 foot fencing which I can cut in half and put around the pool. I will also do some landscaping with cypress grass and Birds of Barbados plants. I have not given up on a natural pool though. However I will probably need a larger piece of land. 🙂


Nonnative El Paso Creatures

This past year El Paso had a lot of rain. Some parts of the city flooded. I got to see some interesting critters in my garden that I did not know I had because they normally do not live in the desert. I probably brought them home from Lowe’s and instead of dying in the arid sand they thrived a reproduced. I now have earthworms and snails! I felt pretty good when I saw them because I must be doing something right. I still have mushrooms too. 🙂

IMAG0622 IMAG2134 IMAG2133 IMAG2132 IMAG2131

Now you may think those are little flecks of dirt, but they are tiny round snails! El Paso does have some snails and they usually have coned shaped houses, so these are not native to the area.


DIY Eclectic Dresser

Having four children means I have a lot of shoes in my home. I was thinking about having a piece of furniture to house the shoes when they are not worn. I started looking online at entryway benches and chests as a means to solve the problem. I found that many of them were about $100 or more which isn’t too bad, but they were not exactly visually pleasing. I thought that it would be nice to have a piece of furniture that was visually pleasing especially since it is the first thing someone would see as they enter my home. I decided that a nicely painted dresser would be great. Plus it provides more storage than a chest or bench.  So now I was on a quest to find a dresser to design and paint. Luckily a few days later my neighbor put a dresser out on her curb. It was structurally sound so I brought it home. (Funny thing is when I gutted my kitchen she took my old kitchen cabinets. 🙂 ) The best part of the dresser is that it was free. IMAG0648   IMAG0649   IMAG0650

As you can see the dresser needed a new paint finish . The teenager who had the dresser used some puffy paint so I needed to scrap that off and sand the dresser initially. Once i was finished sanding i applied a gray primer on top to adhere to the original finish and to allow the new paint to bond well.

IMAG0658   IMAG0657   IMAG0654   IMAG0661

My next step was coming up with a decorative design. I drew the design I wanted unto poster board and then cut out my design with an exacto knife. I created my own design so it would be custom sized to the dresser. I made a design that fit the top and sides. I then created a design for the drawers. I taped the DIY stencil to my dresser and used spray paint to fill in the design. Because I used spray paint I did get some over spray, but that is ok, I can touch it up later. If I do something like this again I will use double sided tape to tape the stencil to the object better or use a sponging technique.

IMAG0679   IMAG0678   IMAG0682   IMAG0683

Here is my finished result. I will also spray a layer of clear coat and work on finding some drawer pulls.

IMAG0680 IMAG0686

DIY Backsplash Demolition and Installation

About a year and a half ago I had my kitchen gutted and replaced all my cabinets and counters. I had a new refrigerator, gas range and microwave put in as well. I was dragging my feet on my backsplash. I could not find tiles that I liked AND could afford. For Christmas this year my mom gifted me my tiles for the backsplash and they are stunning. Since it is Christmas time I decided to do the installation myself to save money. Plus I wanted to learn how to tile and the backsplash is one of the easiest to start from. This is my first tile job.

The first obstacle was removing the old backsplash. This was not as easy as just plucking the tiles off the wall with a crow bar. I think the construction workers used liquid nails. This is part of the reason why I did not have a new back splash yet besides not finding tiles I liked that were affordable. I ended up cutting the drywall out of the wall where the old tiles were installed. I used a jigsaw and a box cutter to do so. It was more work than I thought it would be but it was faster than any other method. After removing those sections of drywall I replaced them with new drywall. Here are some pictures…

IMAG2206   IMAG2210   IMAG2213   IMAG2211

I did not mud the seams, instead I used drywall tape. The tape provided enough of a substrate for the tiles to adhere to. Plus my seems were very thin so the tiles went over them with no problems.

The next day I began installing the tiles to the walls. If you have a glossy paint on your walls you should lightly sand over them first. I used Type 1 Mastic I bought at Lowes to adhere the tiles. I used a zigzag edged trowels to place the mastic on the wall. Because my tiles were in 12 inch by 12 inch sheets it was fairly easy to apply them. Many times tutorials wioll tell you to use a rubber grout float to press them into the wall. Instead I pressed each tile into the wall to make sure they had a tight grip. In harder to reach places, or areas where only one or two tiles were needed to be adhered, I “buttered” the tiles then applied them. “Buttering” the tiles is when you apply the mastic directly to the tile first. Behind my stove I attached a wood beam flush to the counter tops to help make sure my tiles stayed lined up.

IMAG2216 (1)   IMAG2214   IMAG2215

Once I had full sheets installed i had to go back and add tiles around light sockets and light switches. To finish the tiles on top near my cabinets I placed rows of the mirror finish glass tiles. I found that I needed some tiles cut. I do not have a tile cutter and they are expensive to buy and rent. Luckily Lowe’s offers free tile cutting. Lowe’s is also where this tile was purchased. It is called “Silver Moon.” I took multiple pieces of tile with me to Lowe’s to have them make the cuts. At first, some of the tile salesmen said that they could not cut the tiles because they were too small. Luckily a more experienced tile salesman proved them wrong by showing them. I was worried for a moment when they told me it could not be done. If you need to have tiles cut, like I did, make sure you take more than you need just in case. I had to make a second trip myself and talk a salesman into doing it since the more experienced gentleman was not there the second time.

This is what my final results look like. I still have one more step to do. The grout. I am a little worried about it because the gray tiles are natural stone they are not level. I am hoping to get the grout done within the next week or so.

IMAG2217   IMAG2270   IMAG2268